View Single Post
  #6  
Old 12-20-2007, 04:16 PM
logem logem is offline
Steel Addict
 
Join Date: Jun 2005
Location: Spring, TX
Posts: 100
It doesn't sound like this is your problem, but . . .

Since you made your own unit, check to verify that the alligator clip is 12VDC (+) and that the etch pad is 12VDC (-). I had mine reversed at first, and the resulting "etch" was a little fuzzy, and actually wasn't even etched into the steel.

Mike LoGiudice
Reply With Quote